Cara Mengatasi EFI Shell Pada Saat StartUp Windows

Cara Mengatasi EFI Shell Pada Saat StartUp Windows - cara memperbaiki jika tampilan EFI shell setelah booting atau setelah menu bios - efi shell version 2.31 cannot find required map name terbaru - Permasalahan seperti point di atas merupakan salah satu permasalah yang umumnya terdapat pada mobo/motherboard bermerek MSI atau motherboard lainnya seperti Gygabyte, intel, askrock, Asus, Evga yang Biosnya Berbasis Uefi(Unified Extensible Firmware Interface) , karena itu hanya masalah pada boot up. EFI Shell Version 2.31 dan permasalahan tersebut bisa membuat kita putus asa.

Gejala awal permasalahan di atas umunya saat kita menggunakan komputer atau pc atau laptop atau netbook ataupun notebook adalah komputer tiba-tiba mati sendiri atau mengalami restart sendiri tanpa ada peringatan atau pesan dari windows message center, dan bisa di bilang seperti Prosesor kepanasan namun temperatur CPU normal-normal saja.


EFI Shell Version 2.10
 Seperti pernyataan atau pesan di atas yaitu  
EFI Shell Version 2.10 [4.641]
Current running mode 1.1.2
Map : Cannot find required map name.

Press ESC in 1 seconds to skip Startup.nsh,  any key to continue
Shell> _

Ada juga

EFI Shell Version 2.31 [4.653]
current running mode 1.1.2
Device mapping table
blk0: block device - alias (null)
pciroot (0x0)/pci(0x1f,0xw2)/sata(0x1,0x0)
blk1: removable blockdevice -alias (null)
pciroot (0x0)/pci(0x1d,0x0)/usb(0x1,0x0)/usb(0x3, 0x0)
blk2: removable block device - alias (null)
pciroot (0x0)/pci(0x1d,0x0)/usb(0x1,0x0)/usb(0x3, 0x0)/scsi(0x0, 0x1)
blk3: removable block device - alias (null)
pciroot (0x0)/pci(0x1d,0x0)/usb(0x1,0x0)/usb(0x3, 0x0)/scsi(0x0, 0x2)
blk4: removable block device - alias (null)
pciroot (0x0)/pci(0x1d,0x0)/usb(0x1,0x0)/usb(0x3, 0x0)/scsi(0x0, 0x3)

Press ESC in 1 second to skip startup.nsh, any other key to continue.

Shell>

Ada juga

EFI Shell Version 2.31 [4.633]
Current running mode 1.1.2
Map: Cannot find required map name

Press Esc in 5 seconds to skip startup.nsh, any other key to continue


shell id>

Lalu bagaimana memperbaiki atau mengatasinya ? atau cara setting suaya normal kembali ?

Caranya cukup mudah dan anda tak perlu ke bengkel komputer karena akan memerlukan biaya yang tidak sedikit tentunya walaupun hanya sekedar setting belaka tanpa adanya pernggantian sparepart komputer karena ini hanyalah masalah setingan bios.

Berikut cara mengatasi EFI shell yang mobo atau motherboard nya berbios berbasis Uefi


  • disable fast boot and windows 8 logo
  • change boot mode from uefi to legacy
  • full screen logo enabled
  • Pastikan boot pertama pada windows boot manager


Berikut Perintah atau command pada Efi shell
Shell Boot Commands


autoboot     -- View or set autoboot timeout variable
bcfg         -- Displays/modifies the driver/boot configuration
boottest     -- Set/View BootTest bits
clearlogs     -- Clears FPL and SEL logs
dblk         -- Displays the contents of blocks from a block device
lanboot     -- Performs boot over lan from EFI Shell
mount         -- Mounts a file system on a block device
reset         -- Resets the system
tftp         -- Tftp to a bootp/dhcp enabled unix boot server
vol         -- Displays volume information of the file system

Shell  Configuration Commands

cpuconfig     -- Deconfigure or reconfigure cpus
date         -- Displays the current date or sets the systemdate
err         -- Displays or changes the error level
esiproc     -- Make an ESI call
errdump     -- View/Clear logs
info         -- Display hardware information
monarch     -- View or set the monarch processor
palproc     -- Make a PAL call
salproc     -- Make a SAL call
time         -- Displays the current time or sets the system time
ver         -- Displays the version information

Shell Device Commands

baud         -- Set serial port com settings
connect     -- Binds an EFI driver to a device and starts the driver
devices     -- Displays the devices being managed by EFI drivers
devtree     -- Displays the tree of devices of the EFI Driver Model
disconnect     -- Disconnects one or more drivers from a device
dh         -- Displays the handles in the EFI environment
drivers     -- Displays the list of drivers of the EFI Driver Model
drvcfg         -- Invokes the Driver Configuration Protocol
drvdiag     -- Invokes the Driver Diagnostics Protocol
guid         -- Displays all the GUIDs in the EFI environment
lanaddress     -- Display LAN MAC addresses
load         -- Loads and optionally connected EFI drivers
loadpcirom     -- Loads a PCI Option ROM
map         -- Displays or defines mappings
openinfo     -- Displays the protocols on a handle and the agents
optload     -- Lists all optional ROM-based efi drivers and apps
pci         -- Displays PCI devices or PCI function config space
reconnect     -- Reconnects one or more drivers from a device
unload         -- Unloads a protocol image

Shell Memory Commands

default         -- Sets, Resets, or Clears default NVM values
dmpstore     -- Displays all NVRAM variables
dmem         -- Displays the contents of memory
memmap         -- Displays the memory map
mm         -- Displays or modifies MEM/IO/PCI
pdt         -- View or set page deallocation table

Generic Shell Commands

alias         -- Displays, creates, or deletes aliases in the EFI shell
attrib         -- Displays or changes the attributes of files or directories
cd         -- Displays or changes the current directory
cls         -- Clears the standard output with an optional background color
comp         -- Compares the contents of two files
cp         -- Copies one or more files/directories to another location
edit         -- Edits an ASCII or UNICODE file in full screen
eficompress     -- Compress a file
efidecompress     -- Compress a file
exit         -- Exits the EFI Shell
help         -- Displays help menus, command list, or verbose help of a command
hexedit     -- Edits with hex mode in full screen
ls         -- Displays a list of files and subdirectories in a directory
mkdir         -- Creates one or more directories
mode         -- Displays or changes the mode of the console output device
mv         -- Moves one or more files/directories to destination
rm         -- Deletes one or more files or directories
set         -- Displays, creates, changes or deletes

EFI environment variables

setsize     -- Sets the size of the file
touch         -- Updates time with current time
type         -- Displays the contents of a file
xchar         -- Turn on/off extended character features

Shell Script Commands

echo         -- Displays messages or turns command echoing on or off for/endfor -- Executes commands for each item in a set of items
goto         -- Makes batch file execution jump to another location if/endif -- Executes commands in specified conditions
pause         -- Prints a message and suspends for keyboard input
stall         -- Stalls the processor for some microseconds

Apakah Anda mereset cmos melalui jumper (atau tombol) pada motherboard itu? Lokasi dapat dilihat di panduan Anda. 


Setelah Anda me-reset CMOS, silahkan masuk ke bios dan periksa pengaturan, esp sata modus sejak default mungkin tidak apa itu ketika Anda menginstal jendela. Dan jendela wont booting jika dalam modus yang salah.

Subscribe to receive free email updates:

5 Responses to "Cara Mengatasi EFI Shell Pada Saat StartUp Windows"

  1. Pada saat Effi shell kyboard dan mouse tdk dapat berfungsi,gmn solusinya Gan..?

    ReplyDelete
  2. Gan gimana solusinya pada saat efi shell keyboard ga berfungsi. Hanya tambol off aja yg berfungsi. Kalo kita klik itu malah tambah banyak shell kosong nya. Mohon di respon gan terimakasih

    ReplyDelete
  3. Gan gimana solusinya pada saat efi shell keyboard ga berfungsi. Hanya tambol off aja yg berfungsi. Kalo kita klik itu malah tambah banyak shell kosong nya. Mohon di respon gan terimakasih

    ReplyDelete